You are here: Home > , > How to Fix Windows 7 and Oe6 Error Code 0x800CCC

How to Fix Windows 7 and Oe6 Error Code 0x800CCC

Are you having difficulty trying to send an email message using the Windows 7 mail program? For the most part this program runs very well with little problems or needed input from you once it is configured and set up. The two biggest causes of problems in any email program are internet connectivity and/or improper account settings during set up. You have two options. If you have been searching the internet and help sites for hours now, stop. It only takes a few moments to delete and then re-create the account with the proper information. With the exception of Netscape Navigator you can re-create your account without losing your contacts or stored messages. Repeat, if you use Netscape as an email client then back up all of your messages and contacts BEFORE recreating your account or all of your contact information will be lost. If the problem is connectivity then there is nothing you can do except for call your internet service provider and talk to tech support.

The information you will need to create the account again is your email address and password as well as the incoming and outgoing server names for your provider. Your account name is in most cases your email address. Your display name is the name you would like people to see on the message you send. If connectivity is not an issue you can do a search for the email server names. So, once more you need:

- display name (your name)

- email address

- password

- username (email address)

- incoming server name (POP3, IMAP or HTTP)

- outgoing server name (SMTP)

Some internet service providers require that you use 'authentication'. If this is the case you must make sure to check the authentication check box provided in the wizard during your account set up. This check box is usually located on the server information screen of the wizard. I should mention that you can always access your account information located in your email client to make changes to your information should you need to. If this is something you feel comfortable doing then all you need to do to locate your information is to find it. This is almost always done by clicking on the TOOLS button at the top of the page and then clicking ACCOUNTS on the menu that drops down. Look for a MAIL tab and click that. (Have you backed up your contacts?)

Once you have clicked the mail tab you will see more tabs relating to server names as well as other account information. It is within this tabbed area that you can look for any mistakes you may have made when you initially set the account up. Or maybe the server names for your internet provider have changed. You can change that here too.

As you can see you need very little information. Setting up an email account in Windows mail or any other program is not difficult. All email clients have a wizard that will walk you through the steps of setting up the account. The most common connectivity or account related errors you will see are 0x800CCC91, which is due to a wrong or misspelled username that was entered during setup, and 0x800ccc0f which is lost internet connection. These are just two of the most common error codes seen. There are others that relate to things like attachments being to large or time outs due to filtering. There are a lot of things that can get in the way of you sending and receiving email and we have only briefly discussed the two that are seen the most.

Remember that if your issue is not related to connectivity you can easily find the server names you require to set up the account for the first time or to re-create it. There are a great many resources out there to help you with your issue. The trick is finding the right answers in a timely manner. If you need specific help then check the resource section for this article. It contains directions to specific email answers. No matter what the issue you are having with your email. A word of sage advice. Back up your contact list right now. Back up all those messages that you are hanging on to. You never know when something unfortunate may happen to your computer or your email program in general. Consider backing up your email information every six months. Put it on a disk or a thumb drive. Export it. Just do not lose it!

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • Twitter
  • RSS
You are here: Home > , , > Windows XP Mode In Windows 7

Windows XP Mode In Windows 7


Windows XP Mode allows Windows 7 users to run Windows XP compatible applications in Windows 7. Windows XP Mode seamlessly integrates into Windows 7. Microsoft is aiming at day to day users who need to run XP compatible software programs that do not work correctly in either Windows Vista or Windows 7 natively.

XP Mode consists of the Virtual PC-based virtual environment and a fully licensed copy of Windows XP with Service Pack 3 (SP3). It will be made available, for free, to users of Windows 7 Professional, Enterprise, and Ultimate editions via a download from the Microsoft web site. XPM works much like today’s Virtual PC products, but with one important exception: As with the enterprise-based MED-V (Microsoft Enterprise Desktop Virtualization) product, XPM does not require you to run the virtual environment as a separate Windows desktop. Instead, as you install applications inside the virtual XP environment, they are published to Windows 7 Operating System as well. With shortcuts placed in the Start Menu users can run Windows XP-based applications (like IE 6) alongside Windows 7 applications under a single desktop.

The interesting aspect here is that the applications will run on the same single desktop. This is good for the end user who can concentrate working on one computer system. Microsoft can now not only claim full compatibility to Windows Vista but also to Windows XP which should make a huge difference in the perception of the new operating system.

Before we begin, you'll want to make sure your system meets the requirements:

* Processor: Processor capable of hardware virtualization, with AMD-V™ or Intel® VT turned on in the BIOS.
* Memory: 2GB of memory recommended.
* Hard disk requirement: 20MB hard disk space for installing Windows Virtual PC. Additional 15GB of hard disk space per virtual Windows environment recommended. Steps to Create a Virtual Hard Drive in Windows 7

How to Install Windows XP Mode in Windows 7

1. Download the Virtual PC beta from Microsoft Virtual PC page and also Windows XP Mode beta from here.

2. Install the Windows virtual PC beta by following the simple on screen procedure and reboot your machine to see Virtual Windows XP entry in your Start menu.

3. Now, Double-click on VirtualWindowsXP.msi package to start Virtual Windows XP wizard and click Next to continue.

4. Select the installation destination for the XP mode. By default it will select the right one. So, simply click Next button.

5. You will see the XP mode installation process. It may take few minutes to complete the installation.

6. Once you complete the installation, Virtual Windows XP starts for the first time. Here you will see Virtual Windows XP license agreement. Accept the license agreement and click Next to continue.

7. In the following window, you need to enter a password for the account. You cannot leave the password field blank. In case, if you don’t like to enter the password each time, you can check the option Remember credentials to store the password.

8. Next you need to configure Windows XP for automatic updates.

9. Once you are done with the configuration, Windows XP mode is ready to use.
  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • Twitter
  • RSS
You are here: Home > > How to Speed Up Windows 7 Quickly and Easily

How to Speed Up Windows 7 Quickly and Easily

Is your Windows 7 slow? Wondering how to speed up Windows 7 without breaking the bank? Well I may be able to help you. But first off you need to make sure you are meeting the minimum hardware requirements to run Windows 7 on your system. Here they are:

• 1GHz processor (32- or 64-bit)
• 1GB of main memory
• 16GB of available disk space
• Support for DX9 graphics with 128MB of memory (for the Aero interface)
• A DVD-R/W drive

Keep in mind however, that if you were able to effectively run Windows XP or Vista, there should be little reason that you cannot also run Windows 7. The new Windows OS is designed to be very light and run quickly without requiring huge amounts of RAM or GHz's. Most folks having problems are the ones trying to jump from Windows 2000 to Windows 7.

If you meet or come close to these requirements and Windows 7 is still slow, then the issue lies somewhere else. For starters, cut down on the amount of programs running in the background. You can use MsConfig to do this or simple install software that will identify programs secretly running in the background and eating up loads of virtual memory.

The second option is to clean Windows registry. This is perhaps the most effective means to speed up Windows 7. There is no internal cleaning tool to clear out errors and corrupt files from the registry. This contributes to significant congestion which will slow down Windows 7 significantly.

While these tweaks can be complicated to perform alone, you can scan your system with software which will fix these problems automatically. It will only take a couple minutes and you should notice a faster Windows 7 right away. Don't worry about compatibility issues, if the program can run on Windows Vista it can run on Windows 7.

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • Twitter
  • RSS
You are here: Home > , , > Repair Windows 7 Registry Errors and Prevent Crashes

Repair Windows 7 Registry Errors and Prevent Crashes

The importance of fixing Windows 7 registry errors cannot be overstated. Since your system interfaces with the registry incessantly, Windows 7 registry errors can afflict different processes with errors. If any problems occur within the registry, it's important to resolve them quickly.

Backing up the Registry with System Restore

One of the best ways to maintain a clean registry is to consistently back up your registry. You can do this by using System Restore. Here's how to backup your registry:

1. Click Start.
2. Open System Tools.
3. Click System Restore.
4. If you have NOT previously utilized System Restore, then click "Next." If you HAVE previously used this function, then check the dot next to "Choose a different restore point."
5. In the following menu, enter or select your desired restore point.
6. Click Next.
7. Click Finish.

You will need to confirm that you wish to restore the system. Your computer will automatically restart in order to accomplish the system restore. Once your computer has started up, you will notice that all settings and processes have been restored to your selected restore point.

Making a Backup with Regedit

If you are encountering registry problems, then System Restore can work as a quick fix. You can also backup your registry another way. Here's how:

1. Click Start.
2. Type "regedit" in the Search box.
3. In the top menu bar, select "File."
4. Click "Export."
5. Then, choose the destination location for the backup files. Make sure you click the "All" option within the Export Range option.
6. Click "Save."

This action will backup your registry to a specified location. This is a great way to safely maintain your registry.

You can restore or backup the Registry using advanced methods such as forming.reg files or importing files from regedit. These methods are a bit harder and require meticulous attention to detail.

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • Twitter
  • RSS
You are here: Home > , , , > Speed up Your Windows Seven Computer with ReadyBoost

Speed up Your Windows Seven Computer with ReadyBoost


Microsoft Windows Seven and Vista has a new feature called Ready Boost. Using this feature we can use a flash memory stick or SD card to store commonly used files for quicker access than off the hard drive.

The flash memory device serves as an additional memory cache—that is, memory that the computer can access much more quickly than it can access data on the hard drive.

Windows ReadyBoost relies on the intelligent memory management of Windows SuperFetch and can significantly improve system responsiveness.

Turning this feature on couldn’t be simpler. Just stick the flash drive, SD card, or whatever flash device you want into your computer. You’ll see a dialog pop up on the screen.

Click the “Speed up my system” link, and you’ll be taken to the ReadyBoost panel for the flash drive.

Just select Use this device, and set the amount of space you want to use. Windows will create what is essentially a paging file on the disk, and will use it for faster access.

Note that this will only work with USB 2.0 devices or SD cards.
  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • Twitter
  • RSS
You are here: Home > , , , , , , , , , , , > Steps to Share Files and Printers between Windows 7 and XP

Steps to Share Files and Printers between Windows 7 and XP

If you are running Windows 7 and have XP on PC(s) you might want to share files between them. The following are the steps to share files and hardware devices like a printer.

Sharing Files In Windows 7 and XP

Sharing folders between two Windows 7 machines with the new HomeGroup feature is an easy process, but the HomeGroup feature is not compatible with Vista or XP. For this tutorial we are using Windows 7 x64 RC1 and XP Professional SP3 connected through a basic Linksys home wireless router.

First make sure both machines are members of the same Workgroup which by default is named Workgroup.

On the Windows 7 machine go into Control Panel \ All Control Panel Items \ Network and Sharing Center then click on Change advanced sharing settings.

You will want to verify the following settings under Advanced Sharing Settings for the Home or Work and Public profile.

If you want any user to have access the public shares turn off password protection. This is located in Advanced Sharing Settings toward the bottom of the list.

If you want to keep it enabled make sure there is a log in account for the other XP machines and they have a password.

Now if you go into Network in Windows 7 you should see your XP machine and the Windows 7 as well.

To share the printer on the Windows 7 machine go into Devices and Printers from the Start menu and double click on the printer icon.

Next double click on “Customize your printer”.

In the Properties screen click on the Sharing Tab and check the box to share the printer and type in its share name.

If your XP machine is an x86 OS you can install Additional Drivers before setting up the XP machine.

To find the shared folders and devices double click on the Windows 7 machine icon under Network. Here you can see the printer connected to my Windows 7 machine is shared and also the Users Folder.

Continue into the Users folder and Public to see the shared folders, here I also created a folder called XP Share just to keep everything in central location.

Over on your XP machine open up My Network Places to find the Windows 7 shared folder.
Double click on the Share folder to find a list of shared folders in the Public folder on Windows. If you have password protection enabled you will need to type in the username and password of the user account on the Windows 7 machine first.

Setup XP With Shared Printer

To set up the shared printer in XP you will need to go into Printers and Faxes from the Start menu and kick off the Add Printer Wizard.

Now select “A network printer, or a printer attached to another computer” then hit Next.

Next select “Connect to this printer…” and type in the path for the printer connected to the Windows 7 machine and click next.

Now click Yes to the confirmation message.

Then click Finish the printer to install and complete the Wizard.

In some cases you will need to install the x86 XP drivers for the shared printer because the Windows 7 drivers are not compatible with XP. When everything is installed open up Printers and Faxes to find the shared printer.

This should help you get started with sharing your files and other devices with your Windows 7 machine.
  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • Twitter
  • RSS
You are here: Home > > Enable/Disable Built-In Administrator Account (Hidden) in Windows 7 or Vista

Enable/Disable Built-In Administrator Account (Hidden) in Windows 7 or Vista

Many Users are thinking what happened to the built-in Admin account of windows that was always created by default in Windows XP or previous operating systems.

The account is also created in Windows 7 or Vista, but since it’s not enabled we can’t use it. While troubleshooting if something needs to run as administrator, we can enable it with a simple command.

Enable Built-in Administrator Account

First we’ll need to open a command prompt in administrator mode by right-clicking and choosing “Run as administrator” (or use the Ctrl+Shift+Enter shortcut from the search box)

Now type the following command:

net user administrator /active:yes

You should see a message that the command completed successfully. Log out, and you’ll now see the Administrator account as a choice.

Note: You’ll note that there’s no password for this account, so if you want to leave it enabled you should change the password.

Disable Built-in Administrator Account

Make sure you are logged on as your regular user account, and then open an administrator mode command prompt as above. Type the following command:

net user administrator /active:no

The administrator account will now be disabled, and shouldn’t show up on the login screen anymore.
  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • Twitter
  • RSS